I received the Riton RT-R Mod 3 red dot test sample from Riton a couple months ago, and pressed it right into service. Mounting it with the included mount, I was able to cowitness the back up sights and get the red dot dialed in. Stepping off twenty five yards and checking zero, it was dead on. We then shot some 350 rounds through the Barnes Precision Machine 7.5″ 5.56 SBR, reviewed here and using the Liberty Suppressors Triumph silence to keep the noise down, reviewed here .
The red dot kept its zero throughout the review even when the rifle was passed off to a few other folks. You can see the large knob in the photo with the “R” on it, as you rotate the knob it cuts the red dot off then on with the next click. Each time the dot is turned on it increases in brightness, throughout the six brightness settings.
The included mount holds the optic above the Picatinny rail high enough to cowitness the back up sights. This is advantageous in the event your optic goes down you can go to your sights without having to remove the optic. This also helps verify zero, as correctly sighted in the 2 MOA dot will sit on top of the front sight post.
The elevation and windage knobs, 1 click is 1 MOA adjustment
The RT-R also includes flip up scope caps and the CR 2032 already installed.
The RT-R is water and shock proof, holding up well through the review.
The RT-R MOD 3 RRD (RIFLE RED DOT)
Product Specifications: * Magnification: 1X
* Objective Diameter: 29mm
* Lens Coating: Fully Multi-Coated
*Click Value: 1 MOA
* W/E Max Adjustment: 120 MOA
* Parallax Setting: 50 Yards
* Field of View: 68ft @ 100yds
* Eye Relief: Unlimited
* Exit Pupil: 28mm
* Dot Size: 2 MOA Red Dot
* Illumination: Red (6 Levels of Brightness with on/off in-between each)
* Battery: 1x CR2032 (Included)
* Waterproof & Shockproof
* Length: 95.5mm
* Weight: 145 grams
* Mount: 1 Piece Cantilever Mount INCLUDED